ADVANCED POLYMER TECHNOLOGY  CORPORATION  is an innovative supplier of coatings and adhesive raw materials 

for the construction, maintenance, architectural, transportation, furniture and industrial finishing markets.  

Raw materials include aliphatic and aromatic based polyisocyanate prepolymers, polyester, polyol 

and polyether co-reactants for one and/or two-component systems like liquid moisture cured adhesives,

reactive hot-melt adhesives, coatings, sealants and other polyurethane (PUR) related products.

Using APT's series of amorphous, liquid and crystalline polyester polyol resins, it is possible to design solvent free, 100% solids Hot Melt adhesives  featuring: Variable open times from 5 seconds to several minutes. Strong, durable, elastic bonds. Adhesion to a broad range of substrates. Heat, moisture, and solvent resistance. Low temperature application for use on temperature-sensitive substrates.   QUALI-LINK SPECIALTY POLYESTERS FOR REACTIVE HOT MELT ADHESIVES: SPA 130 and SPA 140  Solid, amorphous polyesters varying in viscosity. Products formulated with SPA 130 and/or SPA 140 display high initial green strength, excellent adhesion to polar substrates, and fast set times. SPL 230 and SPL 250 Liquid polyesters, varying in viscosity, for the manufacture of reactive hot melt adhesives with excellent flexibility and improved adhesion to non-polar substrates. SPL 280-110 Low viscosity liquid polyester for the manufacture of reactive hot melt adhesives, which display improved wetting, excellent flexibility and good adhesion to non-polar substrates. SPC 320 and SPC 340 Solid polyester for the manufacture of reactive hot melt adhesives. Products formulated with SPC 320 and SPC 340 provide high strength and good flexibility. SPC 360 Solid, crystalline polyester for the manufacture of reactive hot melt adhesives. Products formulated with SPC 360 display high strength, excellent flexibility and modulus. SPC 380 Solid, highly crystalline polyester for the manufacture of reactive hot melt adhesives. Products formulated with SPC 360 demonstrate very fast setting times and high final strength. SPC 381 Solid, highly crystalline polyester for the manufacture of reactive hot melt adhesives. Products formulated with SPC 381 show high strength and very fast setting behavior. Top of the Page

 

APT's line of Polyester Polyols typically is used to formulate high-solids, high-build coatings for flooring applications.  Using APT raw materials produces coatings that feature: Non-skid; high chemical resistance, abrasion and impact durability. Resistance to thermal shock with excellent crack-bridging and waterproofing capabilities. Odorless and environment-friendly applications based on no V.O.C.s; solvent free; non-flammable components.   QUALI-LINK SPECIALTY POLYOLS: APT 105 Branched polyol with ester and ether groups. APT 105 is suitable for the production of two-component, high solids polyurethane coatings, adhesives, and sealants where good acid, alkaline, and water resistance are desired. APT 106 Branched polyol with ester and ether groups. APT 106 is suitable for the production of two-component, high solids polyurethane coatings, adhesives, and sealants. APT 106, when used in conjunction with APT 105 and APT 108, acts to elastify and decrease viscosity. Products formulated with APT 106 display good acid, alkaline and water resistance. APT 108 Branched polyol with ester and ether groups. APT 108 is suitable for the production of two-component, high solids polyurethane coatings, adhesives, and sealants. These products provide tough wear and tear resistance surfaces, in addition to good acid, alkaline and water resistance. APT 201 Polyester resin supplied in n-butyl acetate. APT 201 is suitable for the production of two-component, thin mil polyurethane coatings. Paints formulated with APT 201 provide excellent UV resistance and are highly suitable for outdoor applications. In addition, these films demonstrate excellent flexibility at room temperature and at low temperatures. Thus, products formulated with APT 201 can be used to coat rigid or flexible substrates. APT 301 Linear, solvent-free, aliphatic polycarbonate polyester. APT 301 is suitable for the production of two-component, high solids polyurethane coatings, adhesives, and sealants. Products formulated with APT 301 display good UV, acid, alkaline, and water resistance. Top of the Page

 

APT's line of aliphatic and aromatic polyurethane prepolymers can be used to formulate polyurethane liquid moisture-curable adhesives, one component primers and binders, two-component coatings and two-component adhesives and elastomers. Based upon APT Prepolymers formulated finished goods can be designed to offer: A wide ranges of viscosities. Flexible but permanent bonds. A wide range of open time. High thermal stability after curing with resistance to fuel, grease, oil, and numerous plasticizers.   SPECIALTY POLYISOCYANATE PREPOLYMERS: QUALIPUR 3230 One component, 100% solids, MDI-based polyurethane prepolymer recommended for moisture-curable primers for metal or concrete. It can be diluted up to 60% with a suitable solvent such as an aromatic hydrocarbon. Qualipur 3230 can also be used in a one- or two-component flooring system which would provide excellent abrasion resistance and flexibility. For use in a liquid moisture-cure adhesive, the product can be filled, pigmented, and accelerated per standard practice with moisture-curable urethanes. QUALIPUR 3280 One-component, 100% solids, MDI-based polyurethane prepolymer. It is recommended for moisture-curing primers and corrosion resistant coatings, industrial flooring and wood adhesives. It can be diluted up to 60% with a suitable solvent such as an aromatic hydrocarbon. Qualipur 3280 can also be used in a one or two component flooring system which would provide excellent abrasion resistance, hardness, and flexibility. QUALIPUR VT/1081 One-component, 100% solids, IPDI-based polyurethane prepolymer. QUALIPUR VF 322/5 and VF 465/4 One-component, solvent containing, IPDI-based polyurethane prepolymers. Top of the Page

Home Page / Company / Recreational Coatings / Protective Coatings / Specialty products / Site map / Contact

ADVANCED POLYMER TECHNOLOGY

109 Conica Lane, P.O. Box 160, Harmony PA 16037

Tel.: +1-724-452-1330 - Fax: +1-724-452-1703